Hand wash pearl type

Follow the same procedure as the hand wash transparent.
Add classisurf sparkle paste 50gms into the D.I water and mix well then follow the same procedure.

Note: This product should never be packaged in clear or transparent containers. Always use a semitransparent container or HDPE containers.

To get antibacterial effect you can add ticlosan (1gm for 2.5 kgs of hand wash).
For a more natural antibacterial add tea tree oil 1gm

Importance of water in liquid formulations

Water is the major constituent in most of the liquid formulations. Many formulators tend to forget this aspect and feel what harm can water do to the formulation. This is where the formulator is wrong. Water as such consists of various minerals depending upon the source. Many of these minerals tend to destabilize the liquid formulations. Minerals like calcium, magnesium, iron, other minerals in smaller quantities also tend to reduce the foaming action, we generally tend to add more surfactant to enhance the foaming in hard water, but actually if your water quality is good the surfactant levels can be reduced and there is a direct savings in the formulations. My suggestion is anyone seeking to manufacture liquid formulations must invest in a good reverse osmosis system and use only ro water to formulate the liquids. This gives a better product clarity, stable product, better viscosity and hence gives big savings and perfect formulation. Reverse osmosis machines have become more economical and hence is a must for any formulator.

Formulation for transparent gel bathing bar

1. De ionized water     200gms
2. classicsurfablend     600gms
3. Mixed (SFA)            200gms
4. common salt             10gms
5. liquicol colour           5drops
6. perfume                    5ml


Procedure:

In an stainless steel vessel take water, surfablend and heat it to 65 degree centigrade, now slowly add the SFA and stir slowly and stir occassionally till all the SFA melts this will take about 25 minutes, next add the salt and allow the whole mass to mix properly and see to it that all the SFA is dissolved, now add the colour and lastly turn off the heat and then add the perfume and mix well and pour into moulds and allow to cool. After 2- 3hrs you can remove the soap from the mould and use it.

The soap will be very gentle and perfectly ph balanced.

People who want to add their own essential oils or aroma therapy oils can add it before adding the perfume.

Not all oils will suit the soap there may be loss in transparency so kindly check the oils;

The amt of oil added must not exceed 10 ml in total.

U can use any plastic mould any shape u like to fill the soap.

Contact us for the soap kits.

some tips

u can even add scrub micro particles to make scrub soap

Almond oil and honey is a good combination
neem and aloe (moisturising and antibacterial)
neem and turmeric
cucumber and aloe
tea tree oil (antibacterial soap)
when adding liquid extracts reduce the water content accordingly.

Formulation for liquid stiffener for fabrics (like revive, ujala stiff & shine)

1. De ionized water         250gms
2. sequester ETD            1gm
3. Vinyl blend                   1kg
4. perfume                      5gms
5. preservative                2gms

Mixing procedure

Mix the preservative and the sequester ETD in the water, now add this water to the pva blend slowly and mix thoroughly ensure the paste is smooth homogenous and free from lumps. lastly add the perfume and mix for another 5 minutes.

Pack the product into hdpe containers.

usage instructions

20 ml to 1ltr clean water, dip 5 - 6 clothes in the solution and allow to soak for 5 min then wring the clothes and allow to dry for a stiff and bright finish
40 ml to 1 ltr for extra stiffness.

can even be used for washing m/c should be added just before rinse cycle.

feed backs and comments welcome.

Checking the PH value

The PH value of the cleaner is of utmost importance. Every mfr has to understand what PH is and how to check the PH value. You can get yourself a PH strip from the laboratory chemical supplier store.

The PH strip consists of a range of values from 2 to 12.5 with different colour patches. each colour patch represents the corresponding PH value.
So when u dip the PH strip in the liquid u would be able to know the PH value of the liquid.
The range from 2 to 6 is acidic in nature (with 2 most acidic and 6 slightly acidic)
The value 7 is considered neutral and balanced (i.e. does not harm the human skin)
The range from 8 to 12.5 is considered alkaline (with 8 being slightly alkaline and 12.5 very alkaline)

We will be coming across the PH in our everyday products which we use. The PH value of the products mfrd should be correct to get the correct efficancy of the product.

Formulation for Toilet bowl cleaner

1. De ionized water 800 gms
2. classicol AT          28 gms
3. HCL (acid)         200 gms
4. Quats                   10 gms
5. acicol blue(liq)        5 gms

Procedure:

To the de ionized water add the colour,  5o gms of acid and mix, next add the classicol AT and blend well add the remaining acid and lastly add the quats.

Allow the product to sit for 24 hrs before pkg.

This formulation can be compared to any commercial product available in the market like harpic, mr muscle, sanifresh etc.